background image

FRITZ!Box as a Telephone System

65

12

FRITZ!Box as a Telephone System

The FRITZ!Box is a telephone system (or PBX: Private Branch Ex-
change) for Internet telephony. This chapter describes convenience 
functions for the telephone system that can be configured in the 
FRITZ!Box user interface, for instance telephone books, answering 
machines and call diversion.

You will also find out which convenience functions can be used to 
make calls, for instance internal calling, alternating between calls, 
fowarding calls and three-party conferences.

12.1

Using the Telephone Book and Call List

Telephone Book

A telephone book is at your disposal in the FRITZ!Box. In the 
user interface the FRITZ!Box telephone book is found in the 
“Telephony” menu.

If a cordless telephone from AVM (for instance FRITZ!Fon MT-
F) is registered on the FRITZ!Box, you can use the telephone 
book directly on the cordless telephone. If multiple AVM cord-
less telephones are registered, you can set up an individual 
telephone book for each cordless telephone in the FRITZ!Box.

Call List

In the call list the FRITZ!Box saves outgoing and incoming 
calls, missed calls, and sent and received faxes.

In the FRITZ!Box user interface the call list is found in the “Te-
lephony” menu.

If the number of a caller or someone called is entered in the 
FRITZ!Box telephone book, the call list will display the name 
from the telephone book.

Numbers that are not saved in the telephone book can be 
added to the telephone book from the call list.

The call list can be stored as a CSV file. CSV files can be 
opened in programs like spreadsheet software.

FB6840LTE-e2.fm  Seite 65  Dienstag, 29. Mai 2012  5:34 17

Содержание Box 6840 LTE






































































































































































Отзывы: