19
USE
•
Place the appliance on a stable base.
•
Turn the cheese holder towards the outside and put a piece of cheese on the
holder.
•
Slide the cheese holder to the desired height with the height regulator, depending
on the thickness of the cheese.
ATTENTION: Always keep 2 cm distance to the heating element. Tightly fasten the
screw (11).
•
If you use a part of cheese, you can turn the cheese holder into a corner of 45°.
Unscrew the screw (9), and adjust the cheese holder so that the upper side of the
cheese lies horizontally. Then tighten the screw.
•
Insert the plug in the socket and turn the thermostat knob into the desired
position. The red control light will turn on. As soon as the desired temperature is
reached the control light will turn off.
•
When first in use, it is possible for some smoke to come from the appliance. This
is normal and will disappear automatically.
•
Turn the cheese holder below the heating element.
•
Let the cheese melt below the heating element. ATTENTION: the appliance is now
hot!
TIP
: Does the cheese not melt (enough)? Check points below:
- Check if the plug is correctly inserted into the socket and into the connection of
the appliance.
- The cheese is too far from the heating element
place the cheese holder on
max. 2 cm of the heating element.
- The chosen temperature is too low
turn the thermostat knob higher.
- The used cheese is not suited for melting
Use raclette cheese.
•
Turn the cheese holder away from the appliance with the handles as soon as the
cheese is sufficiently melted.
•
Scrape of the desired amount of cheese.
•
After 2 or 3 portions, remove the excess of crust before you continue.
•
Push the cheese holder back below the heating element. If necessary, adjust the
height of the cheese holder. ATTENTION The appliance is hot! To change the
height of the cheese holder while in use, use oven gloves.
•
After use, turn the thermostat knob off and pull the plug from the socket and from
the connection of the appliance.
•
Let the appliance completely cool down before you move, dismount or clean the
appliance.
