Frister Rossmann 404 QUILTER PROFESSIONAL, Краткое руководство по эксплуатации

Страница: 14 / 15

- 14 -
BUTTONHOLE SEWING
1. PLACE BUTTON IN BUTTONHOLE
FOOT AND ADJUST SLOT TO SIZE OF
BUTTON.
2. REMOVE ORDAINARY SEWING FOOT
& FIT BUTTONHOLE FOOT.
3. PULL UPPER & LOWER THREADS
APPROX 10cm & LAY UNDER
BUTTONHOLE FOOT.
4. PRESS PATTERN “SELECTION
BUTTON” No 8 FOR SELECT MODE.
USE EITHER OF STITCH LENGTH
BUTTONS TO SELECT BUTTONHOLE
LINE, AND THEN SELECT DESIRED
BUTTONHOLE BY USING EITHER OF
STITCH WIDTH BUTTONS.
5. PRESS PATTERN SELECT BUTTON
No 8 TO SECURE BUTTONHOLE.
6. MARK OUT POSITION OF
BUTTONHOLE ON FABRIC.
7. PLACE FABRIC UNDER BUTTONHOLE
FOOT & LOWER FOOT.
8. LOWER BUTTONHOLE LEVER, No 12,
LOCATED UNDER LIGHT, AT REAR OF
NEEDLE THREADER
(SEE DIAGRAM 1).
9. START SEWING SLOWLY UNTIL
FABRIC RETURNS TO THE START
LINE AND THEN STOP SEWING.
10. RAISE BUTTONHOLE FOOT &
REMOVE FABRIC.
Bartacks
Buttonhole
locations
(Marks)
(Diagram 1)
(Diagram 2)
(Diagram 3)
(Diagram 4)
Button adjuster
Button slot
Remake
：
Buttonhole patterns are one time stitches.
Buttonhole
lever