manualshive.com logo in svg

Fristam Pumps FKL 15, Оригинальное руководство пользователя, Страница: 20 / 40

Поделиться
Скачать
Fristam Pumps FKL 15 Скачать руководство пользователя страница 20

/ /  FKL PUMP SERIES / / /

20

CAUTION

►

Mount the rotating seal ring so that it fits onto the shaft face.

Preassembly of pump casing:

Fig. 27

Mounting of pump casing

3. Insert the rotating seal ring 

(412.65)

  and 

(412.67)

 in the 

pump casing 

(101)

.

4. Slide the key 

(477.60)

 onto the stationary seal ring 

(475.60)

 

and insert the seal ring and key into the pump casing.

CAUTION

Align the key and the stationary seal ring to the cylindrical pins 

(562.60)

 of the pump casing.

5. Insert the key 

(477.61)

 into the pump casing. 

CAUTION

►

Align the key to the cylindrical pins 

(562.60)

 of the pump 

casing.

6. Install the stationary seal ring 

(475.61)

 in the pump casing. 

CAUTION

►

Align the stationary seal ring to the cylindrical pins 

(562.60)

 

of the pump casing.

7. Mount the pump casing on the shafts and slide it onto the 

gearbox.

CAUTION

The pump casing does not lie flat on the gearbox. Material 
damage from warpage of pump casing.

►

Secure the pump casing with the socket screws in the pump 
casing to the gearbox:

8. Subsequently mount the shaft seal of the rotor; for details, 

see 

Chapter 10.9.2, "Mounting of the Rotors," page 24

.

Case C

Preassembly on shaft:

Fig. 28

Rotating seal ring with O-ring

1. Mount the O-ring 

(412.63)

 on the shaft.

2. Slide the rotating seal ring 

(472.60)

 onto the shaft.

CAUTION

►

Mount the rotating seal ring so that it fits onto the shaft face.

Preassembly of mechanical seal chamber:

Fig. 29

Assembly of mechanical seal chamber 

3. Equip the mechanical seal chamber 

(47-2.60)

 with O-rings 

(412.65)

 and 

(412.60)

.

Note: O-ring 

(412.60)

 is only installed in FKL 205-580.

4. Slide the key 

(477.60)

 onto the stationary seal ring 

(475.60)

 

and insert the seal ring and key into the mechanical seal 
chamber.

CAUTION

►

Align the key and the stationary seal ring to the cylindrical 
pins 

(562.60)

 of the mechanical seal chamber. 

5. Insert the key 

(477.61)

 into the mechanical seal chamber.

101

412.65

412.67

477.60

475.60

475.61

477.61

Pump size

Casing screws
Tightening Torque [Nm]

15 - 20

5

Table 6  Tightening torque  for casing screws

412.63

472.60

101

412.60

412.65

47-2.60

901.64

475.60

477.60

412.67

477.61

504.60

93-1.60

Содержание FKL 15









































Отзывы:

Нет отзывов