FRIGOGLASS Impulse Chest Cooler, Руководство пользователя

Страница: 10 / 14

ENG
FAULT POSSIBLE REASONS HANDLING
The thermostat setting is not
correct. Rotate the thermostat knob
clockwise.
The ICM has recently been
reloaded with warm products. It
takes 8-16 hours to cool them
down.
Preferably, reload the ICM
before night closing.
The ICM is loaded in such a way
that the air circulation in the
interior is getting blocked. Load the ICM according to the
standards you have been
provided with by the company.
The door does not seal properly.
Repair the doors for proper
closing (this type of repair
should be performed by an
authorised technician).
The cooler
does not cool
enough. The
products are
warm.
Leakage in the cooling system.
Repair the leakage (this type of
repair should be performed by
an authorized technician).
For this particular ice cold
merchandiser, a powerful
mechanism is needed and
consequently a certain amount
of noise cannot be avoided.
Ice Cold Merchandisers are
of dynamic type, according
to the specifications that the
company is offering.
Intense metallic noise. Call a Service technician.
The ICM
sometimes
makes noise.
Inclined or curved floor.
Level the ICM properly by
adjusting its feet. Placing a spirit
level on the top of the ICM will
assist you in leveling it.
The drainage hole for the
condensate water is blocked.
Unblock the drainage hole.
There is water
on the floor.
There is a leakage in the tray. Call a Service technician.
The lights don’t
work. The fluorescent tubes or ballast
or starter are out of order.
Call a Service technician.
The supply
cord is
damaged.
If the supply cord is damaged, it
must be replaced by the
manufacturer, its service
provider or similarly qualified
persons in order to avoid a
hazard.
If after all the above-mentioned checks the problem with your ICM remains, contact
the customer service department of your supplier and provide the following
information:
x
Type of ICM
x
Serial number of the ICM
x
Brief description of the problem / observation