5
Helpful Advice Before Installation
•
Please retain all packaging until you have checked and counted all the parts and other package
contents.
•
The package contains small apparatus which should be kept away from young children and
infants.
•
We suggest that you move all the smaller parts into a container to reduce the risk of losing them.
•
At least 2 people are required to install this fireplace.
•
It is recommended to place your fireplace near an existing outlet, for ease of electric connection.
•
Store your fireplace in a dry, safe and dust-free place while drilling, for fireplace installation.
•
Do not attempt to wire new outlets or circuits. To reduce the risk of fire, electric shock or injury
to persons, always have a licensed electrician perform maintenance and other repairs.
•
Connect to properly grounded outlet only
Tools Needed
•
Power drill
•
Screwdriver
Installation
•
Do not connect the fireplace to the power supply until properly fixed to the wall and the
instructions are carefully read.
•
Make sure the area to be drilled does not have any hidden electrical wires or water and gas
pipes.
•
The minimum distances must be observed as shown in the diagrams below.
•
During installation of the fireplace, avoid any possible damage to concealed cables.
•
Please be careful when drilling holes.
•
This fireplace is designed to be permanently fixed to a wall. Choose a wall that is sturdy enough
to hold the weight of the fireplace such as a brick or cinder block wall. If positioning on drywall,
it must be fixed to studs. If you are not sure if the wall is stable enough,
then consult a hardware
expert. The wall bracket must be fixed horizontally with the cable routed to the bottom right of
the fireplace.
•
For optimum viewing of the fuel bed, it is recommended that there be a distance of 2 feet from
the bottom of the fireplace relative to the floor (see figure for recommended fixed dimensions).
