Oven Control Functions
9
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.
For satisfactory use of your oven, become familiar with
the various pad functions of the oven as described below.
BROIL PAD
— Used to
select the variable broil
function.
UP and DOWN ARROW PADS
— Used along
with the function pads to select oven
temperature, time of day, clean time and minute
timer.
BAKE PAD
—Used
to select the bake
function.
SELF-CLEAN PAD
—
Used to select the
Self-Cleaning cycle. A
2 or 3 hour Self-Clean
time may be selected.
OVEN, PREHEAT & DOOR LOCKED LIGHTS*
— The
"OVEN" light
will glow each time the oven turns on to maintain the set oven
temperature. The
"PREHEAT" light
will glow when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual oven temperature. The
"DOOR LOCKED" light
will flash
when the oven door locks and unlocks or when using the Self-
Clean cycle or the oven door lockout is activated.
FEATURE INDICATOR LIGHTS
—
These light to show which feature
is in use.
CLOCK PAD
— Used
to set the time of day.
CLEAR/OFF PAD
— Used
to clear any function
previously entered
except the time of day
and minute timer. Press
CLEAR/OFF
to stop
cooking. Also the
CLEAR/
OFF
pad is used to
activate oven door
lockout setting.
TIMER ON/OFF
PAD
— Used to set or
cancel the minute
timer. The minute timer
does not start or stop
cooking. Also,
TIMER ON/OFF
pad is
used to set the
Continuous Bake
feature.
*Note: The
OVEN
indicator light on the electronic display will turn ON and OFF when using the Bake feature and during
preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When the
preheat indicator light turns OFF, your oven is ready.
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1.
Press
. "— —" appears in the display.
2.
Press and hold the
until "HI" appears in the display.
3.
Press and hold
until °F or °C appears in the display.
4.
Press the
or
to change °F to °C or °C to °F.
5.
Press any control pad to return to normal operating mode.
