4
2. Fasten the blade assembly to the container, connect the power cord of the main
machine and turn on the power supply. Align the vessel with the interface of main
machine. Rotate clockwise to fasten, the READY lamp is on to indicate the installation
has been completed.
3. Pull the lever downwards, the indicator lights jump to START-UP and the motor
starts working.(Note: Single stirring time should not exceed 1 minutes). Remove the
cup after juicing, after unplugging the power to replace lid, it can be taken away or
used after inserting a straw.
Care and maintenance
Note
:
Switch the blender off by turning the knob to off and unplug it before cleaning it.
Exercise extreme caution
.
Take care when handing the blade unit -the blades are
extremely sharp.
Never immerse the motor unit into mater. Wipe the outside of the motor unit
with a clean,damp cloth.
Generally, Do not run the appliance for more than 1 minute at once. Allow the
appliance to cool for at least 5 minutes every time it has been used for 1 minute.
This can be repeated 3 times. Allow the appliance to cool afterwards to room
temperature before using again.
Cleaning the jug with the blades fitted
Empty the cup, fill it will water, add a little washing-up liquid(not exceed 8 OZ). Put
the cup back onto the machines principals and turn the switch on about 15 seconds.
Operate the blender until you are satisfied that any food residue has been washed
