6
Status Window
The STATUS window, available on some models,
indicates the following activity:
1-24.............
Number of delay start
hours. The last hour
will count down in
minutes.
CL....................
Close dishwasher
door. The status
indicator lights will
also fl ash to indicate
current cycle status.
MINUTES..........
Number of minutes
left in cycle (1-199).
OPERATING INSTRUCTIONS
My Favorite Cycle
The MY FAVORITE CYCLE option allows you to
program your preferred cycle and options into
one button. Once Programmed, simply press the
FAVORITE CYCLE button followed by the START/
CANCEL pad will select the programmed cycle and
options.
To Program the FAVORITE CYCLE button:
1.
Select your preferred cycle and options
2.
Hold the FAVORITE CYCLE button for 3
seconds.
The LED over the FAVORITE pad turns on
indicating the MY FAVORITE CYCLE option has
been programmed. To change the MY FAVORITE
CYCLE option simply repeat steps one and two
above.
To Cancel a Cycle
To cancel a cycle at anytime, open the door and
press the START/CANCEL pad until you hear a
tone. When the door is opened, the last cycle
selected will be displayed. If desired, a new cycle
can now be selected by pressing START/CANCEL
pad and upon closing the door the cycle will begin.
Delay Start
The DELAY START option allows you to
automatically delay starting your dishwasher from
1-24 hours.
To activate press the DELAY START pad until the
desired delay time shows in the STATUS window
and press START.
To cancel the DELAY START option and begin the
cycle before the delay period is over, press the
START/CANCEL pad until the status window show
cycle duration. Press START/CANCEL again and
close the door.
Child Lock Controls
To prevent children from accidentally changing the
dishwasher cycle or starting the dishwasher, lock
the dishwasher controls by pressing the DELAY
START pad until the status window displays “loc”.
To unlock the controls, press the DELAY START
pad until “loc” is no longer displayed in the status
window.
Status Indicator Lights
The CLEAN light will remain on until the door is
opened.
When the SANITIZE option is selected and the
criteria is met, the Sanitized indicator will display
and remain on until the door is opened. If the
sanitization criteria is not achieved, the indicator
will not display. This can happen if the cycle is
interrupted or if the sanitization temperature
could not be reached due to incoming water
temperature signifi cantly below 120
0
F.
Green Light
When the GREEN LIGHT illuminates on the fl oor
this indicates that the wash cycle is complete.
L0----L6............ Level of Rinse Aid
dosage.
