P/N 134066300 (0107)
Cycle Selection
(continued)
Auto
Regular/Whites Cycle
This cycle is best for cotton items. Drying time is
determined automatically at the temperature selection
of your choice.
• High heat is suggested for cotton items.
• Initially set cycle selector on
NORMAL DRY.
• For items requiring more drying time, set cycle
selector on
MORE.
• For items requiring less drying time, set cycle
selector on
LESS.
Auto Delicate Cycle
This cycle is best for knit and delicate items. Drying time
is determined automatically at the temperature selection
of your choice.
• Low heat is suggested for knit and delicate items.
• Initially set cycle selector on
NORMAL DRY
.
• For items requiring more drying time, set cycle
selector on
MORE
.
• For items requiring less drying time, set cycle
selector on
LESS
.
• A signal will sound toward the end of the cool down
period when the End of Cycle chime is turned on.
• If the
Press Saver
option is turned on, the cycle
selector will advance to the
Press Saver
setting.
Unheated tumbling continues during
Press Saver
for
16 minutes to help reduce wrinkling if the dried load
cannot be removed promptly. A signal will sound
briefly every five minutes as a reminder to remove
the load when the End of Cycle chime is turned on.
Timed Dry Regular Cycle
This cycle provides approximately 60 minutes of drying
time at the temperature selection of your choice.
Auto Perm Press/Colors Cycle
This cycle is best for permanent press items. Drying
time is determined automatically at the temperature
selection of your choice.
• Medium heat is suggested for permanent press
items.
• Initially set cycle selector on
NORMAL DRY.
• For items requiring more drying time, set cycle
selector on
MORE.
• For items requiring less drying time, set cycle selector
on
LESS.
• A signal will sound toward the end of the cool down
period when the End of Cycle chime is turned on.
• If the
Press Saver
option is turned on, the cycle
selector will advance to the
Press Saver
setting.
Unheated tumbling continues during
Press Saver
for
16 minutes to help reduce wrinkling if the dried load
cannot be removed promptly. A signal will sound
briefly every five minutes as a reminder to remove
the load when the End of Cycle chime is turned on.
Energy Saving Tips
• Keep the lint screen clean and exhaust the dryer
correctly.
• Sort laundry properly and select proper temperature
and cycle settings. Choose an automatic dry cycle
whenever possible for accurate drying time.
• Dry only full loads. Single items and small loads
usually take longer to dry.
• Avoid overloading, adding wet items to a partially
dry load, and overdrying.
• Dry one load after another to take advantage of a
warm dryer.
• Opening the door needlessly causes warm air to
escape, which prolongs drying time.
• If possible, use the dryer on low humidity days.
• Install the dryer in an area where the room
temperature is at least 45°F (7°C).
PRESS SAVER
COLORS/
WHITES/
COLORS
/
PRESS
SAVER
WHITES
/
PRESS
SAVER
ON
OFF
END OF CYCLE
SIGNAL
