2
4. CHECK FOR ANYTHING THAT COULD BLOCK
AIRFLOW - check area outside of window for things
such as shrubs, trees, or awnings. Inside, be sure
furniture, drapes, or blinds will not stop proper airflow.
5.
Check the available electrical service
- power supply must
be the same as that shown on the unit serial nameplate.
(See Owner’s Guide for serial plate location.) Power cord
is 48''long. Be sure you have an outlet near.
All models have a 3-prong service plug to provide proper
service and safe positive grouding. Do not change plug in
any way. Do not use an adapter plug. If your present wall
outlet does not match your plug, call a qualified electrician
to make the needed change.
6.
Carefully unpack air conditioner
- remove all packing
material. Protect floor or carpet from damage. Two
people should be used to move and install unit.
Tools Required
a large flat blade screwdriver
tape measure
adjustable wrench or pliers
pencil
Level
Socket wrenches
Phillips screwdriver
Hardware (in plastic bag)
Qty.
2
3
1
4 ea.
2 ea.
2
10
Washer Head
Locking Screw
For window panels
3/4'' Long Hex-
Head Screw
Safety Lock
1/2'' Long Screw
and Locknut
3/4'' Long Flat
Head Bolt and
Locknut
Sill Angle Bracket
Long hex-head
locking screw for
top angle, side
retainer 5/16''
Long
Avoid fire hazard or electric
shock. Do not use an extension cord or an
adaptor plug. Do not remove any prong from
the power cord.
Grounding type wall
receptacle
Do not, under any
circumstances, cut,
remove, or bypass the
grounding prong.
Power supply cord
with 3-prong grounding
plug and current
detection device
