Frigidaire Gallery LGEF3045KF Скачать руководство пользователя страница 25

Страница: 25 / 36

The

bake time

and

delay start

pads are used to set

the Sabbath feature. The Sabbath feature may only be

used with the

bake

feature. The oven temperature may

be set higher or lower after setting the Sabbath feature

(the oven temperature adjustment feature should be used

only during Jewish Holidays), however the display will not

be visible and no audible tones will be provided when a

change occurs.

Once the oven is properly set using the

bake

feature

with the Sabbath mode active, the oven will remain

continuously ON until cancelled. The Sabbath mode will

override the factory preset 6-Hour Energy Saving feature.

If the oven light(s) are needed during the Sabbath,

press the

oven light

pad

before

activating the Sabbath

feature. Once the oven light is turned on and the Sabbath

feature is active, the oven light will remain on until the

Sabbath feature is turned OFF. If the oven light needs to

be off, be sure to turn the oven light off before activating

the Sabbath feature.

1. Be sure that the clock is set with

the correct time of day.

2. Arrange the oven racks and place

the food in the oven and close door.

3. Press

bake.

4. Press

start.

5. If a

timed bake

delayed

timed bake

is needed

then enter the time in this step.

If not, skip this step and continue

to step 6. Refer to the

bake time

delay start

instructions.

Remember the oven will shut-off

after completing a

timed bake

delay start

and

therefore may only be used once

during the Sabbath/Jewish Holidays.

The maximum

delay start

time

is 11 hours & 59 minutes.

6. Press and

hold both the

bake time

and

delay start

pads

for at least 3 seconds

simultaneously. The control will

beep and

SAb

will appear in

the display (See Fig. 1). The oven

is properly set for the Sabbath

once

SAb

appears in the display.

To program the oven for 350°F bake and activate

the Sabbath feature:

Step Press

FOOD POISONING HAZARD.

Do not let food sit for

more than one hour before or after cooking. Doing so

can result in food poisoning or sickness.

WARNING

It is recommended that any oven temperature change with

the Sabbath feature active be followed with 2 presses of

the

start

pad. This will insure the oven remains ON even

if the attempt to set the oven temperature was lower

or higher than the oven control can accept. If the oven

temperature is set incorrectly, the oven temperature will

default to 170°F or 550°F. Try to set the desired oven

temperature again.

To Set the Sabbath Feature

(for use on the

Jewish Sabbath & Holidays)

For further assistance, guidelines for proper

usage and a complete list of models with

the Sabbath feature, please vist the web at

http:\\www.star-k.org.

Fig. 1

SETTING OVEN CONTROLS

Содержание Gallery LGEF3045KF





































Результаты поиска

Содержание Gallery LGEF3045KF

Отзывы:

Похожие инструкции для Gallery LGEF3045KF

Бренды по названию

Популярные бренды

Frigidaire Gallery LGEF3045KF, Инструкция по использованию и уходу

Результаты поиска

Содержание Gallery LGEF3045KF

Отзывы:

Похожие инструкции для Gallery LGEF3045KF

Бренды по названию

Популярные бренды