16
CARE AND CLEANING
Care of Drain Air Gap
If a drain air gap was installed for your
built-in dishwasher, check to make sure
it is clean so the dishwasher will drain
properly. A drain air gap is usually
mounted on countertop and can be
inspected by removing the cover. This
is not part of your dishwasher and is not
covered by warranty.
Winterizing
A dishwasher left in an unheated place
should be protected from freezing. Have
a qualified person do the following:
To Restore Service:
1. Direct water line discharge into a
pan and open the valve to flush the
line.
2. Reconnect the water, drain, and
electrical power supply.
3. Turn on water and electrical power
supply.
4. Fill both detergent cups and run
dishwasher through a
Heavy Wash
cycle.
5. Check connections to make sure
they do not leak.
To Disconnect Service:
1. Turn off electrical power to the
dishwasher at the supply source by
removing fuses or tripping circuit
breaker.
2. Shut off water supply
3. Place a pan under the inlet valve.
Disconnect water line from inlet
valve and drain into pan.
4. Disconnect drain line from pump
and drain water into pan.
CAUTION
Property Damage Hazard
Freezing temperatures may cause
water lines to rupture. Be sure all
supply lines to and circulating lines
within dishwasher are protected.
Failure to do so could result in property
damage.
NOTE
See Installation Instructions for more
details on disconnecting and restoring
service to your dishwasher.
