Frigidaire FWF 81663W, Руководство пользователя

Страница: 18 / 32

• Put the detergent and the fabric
conditioner into the compartments.
• Carefully close the detergent drawer.
Activating the appliance
Press and hold the on/off button to activate
or deactivate the appliance.
A tune sounds when the appliance is
activated.
Setting a programme
1. Touch the programme button and set
the programme:
• The indicator of the button
flashes.
• The display shows the programme
duration.
2. If necessary, change the temperature
and the spin speed or add available
options. When you activate an option,
the indicator of the set option comes on.
If you set something incorrect, the
display shows the message
.
Starting a programme without
the finish in option
Touch the button .
• The indicator of the button stops
to flash and stays on.
• The programme starts, the door
locks, the indicator is on.
• The drain pump can operate for a
short time at the beginning of the
washing cycle.
After approximately 15 minutes from
the start of the programme:
• The appliance adjusts automatically
the programme duration agree with
the laundry load.
• The display shows the new value.
Starting a programme with the
finish in option
1. Touch the button again and again to
choose the number of hours in which
you want the washing cycle to be
finished.
The display shows the number of hours you
set (e.g.
) and the indicator above the
button is on to show that his option is
active.
2. Touch the button
:
• The door is locked.
• The appliance starts the countdown.
• When the countdown is completed,
the programme starts automatically.
You can cancel or change the set of
the finish in option before you touch
the button
. After touching the
button you can only cancel the
finish in option.
To cancel the the finish in option:
a. Touch the button to set the
appliance to pause. The indicator of
button
flashes.
b. Touch the button until the
indicator above this button goes off.
Touch the button
again to start
the programme immediately.
Interrupting a programme and
changing the options
You can change only some options before
they operate.
1. Touch
.
The indicator of this button flashes.
2. Change the options. If you change any
option the finish in option (if set) will be
disabled.
3. Touch again.
18
DAILY USE