
23
Do not use with water that is
microbiologically unsafe or of unknown
quality without adequate disinfection
before or after the system. Systems
certified for cyst reduction may be used
on disinfected waters that may contain
filterable cysts.
Test & certification results:
• Rated Capacity - 125 gallons/473
liters for
PureSource
Ultra II
TM
ice
and water filter
• Rated service flow - .65 gallons
per minute
• Operating Temp: Min. 33°F,
Max. 100°F
• Maximum Rated Pressure - 100
pounds per square inch
• Recommended Minimum Operating
Pressure: 30 pounds per square inch
The
PureSource Ultra II
TM
ice and water filter system is
tested and certified to NSF/
ANSI Standards 43, 53 and
401 for the reduction of claims
specified on the performance
data sheet.
More about the Advanced
Water Filter
FILTER REPLACEMENT
To replace the PureSource Ultra II
TM
water filter:
It is not necessary to turn the water
supply off to change the filter. Be ready
to wipe up any small amounts of water
released during the filter replacement.
(Instructional video of procedure can be
found on Frigidaire.com.)
1. Turn off
Ice Maker
on the appliance
control display.
2. Remove the old filter by rotating it
counterclockwise (to the left) 90
degrees to release it.
3. Slide the old filter cartridge straight
out of the housing and discard it.
4. Unpackage the new filter cartridge.
Slide it into the filter housing
as far as it will go with the grip
end horizontal.
5. Push lightly inward on the filter
while rotating it clockwise (to the
right). The filter will then pull itself
inward as it is rotated. Rotate the
filter 90 degrees until it stops and
the grip end is vertical. A very light
click may be heard as the filter locks
into place.
6. Press and hold the
Reset Water
Filter
button on the appliance
control display for 3 seconds.
When the indicator is no longer
illuminated, the water filter status
has been reset.
7. Turn on
Ice Maker
on the appliance
control display.
8. In order for the ice maker to work
properly, clear air from the water
filter tubing by filling the ice bucket
completely twice. Discard the ice
produced.