6
Status Window
The STATUS window indicates the following
activity:
OPERATING INSTRUCTIONS
MINUTES..........
Number of minutes
left in cycle (1-99).
L1-L4................. Level of Rinse Aid
dosage.
1-24.................
Number of delay start
hours. The last hour
will count down in
minutes.
CLOSE.................. Close will scroll
across the status
window indicating the
door needs to be
closed.
Opening the door while the
appliance operates
If you open the door while a cycle is running or
delay is counting down, the dishwasher will stop
running.
The LEDs of selected cycle and options are
illuminated. The status window displays the
remaining cycle time or delay time and then
displays ‘Press Start’.
To resume, press START/CANCEL pad and close the
dishwasher door immediately.
The status window displays ‘Close’ after the START/
CANCEL pad is pressed.
A tone will sound indicating that the dishwasher
continues from the point of interruption after the
door is closed.
If the dishwasher door is kept open for too long, or
the door is closed without pressing START/CANCEL
pad, the running cycle or delay countdown will be
cancelled.
Spray
Press SPRAY pad to select this option. This varies
the pressure optimally for the cycle’s intended
normal use.
Scour
Press SCOUR pad to select this option. This
provides a very high “scour” pressure. Due
to wash cycle optimization, this option is not
selectable in all wash cycles.
SPRAY and SCOUR can not both be selected to run
together.
Child Lock Controls
To prevent children from accidentally changing
the dishwasher cycle or starting the dishwasher,
lock the dishwasher controls by pressing the AIR
DRY pad until the status window displays “loc”. To
unlock the controls, press the AIR DRY pad until
“loc” is no longer displayed in the status window.
To Cancel a Cycle and Delay Start
Both running cycle and delay countdown can be
cancelled at any time.
Open the dishwasher door and press the START/
CANCEL pad until you hear a tone.
The running cycle or delay countdown is cancelled.
If desired, a new cycle can now be selected. By
pressing START/CANCEL pad and closing the door
immediately, the new cycle will begin.
PRESS START.......... Press Start will
scroll across the status
window indicating the
START/CANCEL pad
needs to be pressed.
To Cancel a Setting
If you have selected your cycle and options and
decide to cancel, by pressing the START/CANCEL
pad, the unit will go into a stand-by mode, which
all LEDs will go out.
Green Light
When the GREEN LIGHT illuminates on the fl oor
this indicates that the wash cycle is complete.
Blue Light
When the BLUE LIGHT illuminates on the fl oor this
indicates that the wash cycle is operating.
