• it can not get hotter than room
temperature, higher than 30 °C,
• it is not longer than 1500 mm,
• it has no narrowing anywhere,
• it is not twisted or tighten,
• it does not get in touch with sharp edges
or corners,
• it's conditions can be easily checked.
When checking the flexible pipe make sure:
• it does not show cracks, cuts, marks of
burnings on the two ends and on its full
length,
• the material is not hardened, but shows
its correct elasticity,
• the fastening clamps are not rusted,
• expired term is not due.
If one or more defects are visible, do not
repair the pipe, but replace it.
The gas supply ramp is on the rear side of
the control panel.
Levelling
CAUTION!
Remove all the accessories from the
oven.
CAUTION!
The assembly should be made by two
people.
1. Disassemble the pan supports and all
the burner assemblies.
2. Tilt the cooker backwards 30 degrees.
30°
3. With the help of a second person who
supports the cooker from falling, fold the
front feet into the holes in the plinth.
35
INSTALLATION