Side-by-Side Refrigerator
FGTC2349K S
23 Cu. Ft. Counter-Depth
Panel Kit-Ready CD Refrigerator - 23 Cu. Ft.
Gallery
Side-by-Side Refrigerator Specifications
•
Panel kit-ready refrigerator doors require installation
of either optional Door Panel Kit or custom-built door panels.
(For details, refer to Door Panel Installation on this page.)
•
Product Shipping Weight (approx.) – 325 Lbs.
•
Voltage Rating – 120V / 60 Hz / 15 or 20 Amps
•
Connected Load (kW Rating) @ 120 Volts = 1.02 kW
(For use on adequately wired 120V, dedicated circuit having 2-wire
service with a separate ground wire. Appliance must be grounded
for safe operation.)
•
Amps @ 120 Volts = 8.5 Amps
•
Always consult local and national electric & plumbing codes.
•
Floor should be level surface of hard material, capable of supporting
fully loaded refrigerator.
•
When installing refrigerator adjacent to wall, cabinet or other appliance
that extends beyond front edge of unit, 20" minimum clearance
recommended to allow for optimum 120° to 180° door swing, providing
complete drawer / crisper access and removal.
(Absolute 4-1/2"
minimum clearance will ONLY allow for 90° door swing which will
provide drawer / crisper access with restricted removal.)
•
To ensure optimum performance, avoid installing in direct sunlight or
close proximity to range, dishwasher or other heat source.
•
For proper ventilation, front grille MUST remain unobstructed.
•
Recess electrical outlet when possible.
•
Water recess on rear wall recommended to prevent water line damage.
•
Water Pressure – Cold water line must provide between 30 and 100
pounds per square inch (psi).
•
Copper tubing with 1/4" O.D. recommended for water supply line
with length equal to distance from rear of unit to household water
supply line plus 7 additional feet. Optional Water Supply Installation
Kits available.
•
Adjustable front rollers to assist with door alignment.
“Built-In Look” Specifications
•
Minimum opening of 70-1/4" H x 36" W x 25" D required to allow for
ease of installation, proper air circulation, and plumbing / electrical
connections.
•
If optional Collar Kit (PN # CK23CDS) is to be used, different cutout
dimensions are required.
(Refer to Collar Kit CK23CDS Installation
Specifications page on web.)
•
Remove all wall / floor molding prior to installation.
Door Panel Installation
•
Removable door trim is designed to accept either optional stainless
steel Door Panel Kit or custom-built door panels to match cabinetry
or other decor.
(For complete custom panel construction and
installation details, refer to Panel Kit-Ready Refrigerator Door Panel
Installation page on web; for complete Door Panel Kit installation
refer to detailed instructions on web or included with kit.)
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
Optional Accessories
•
Stainless Steel Door Panel Kit – (PN # PK23CDS).
•
Stainless Look Collar Kit – (PN # CK23CDS).
Specifications
subject to change.
FRIGIDAIRE®
USA
•
250 Bobby Jones Expressway
•
Martinez, GA 30907
•
1-800-FRIGIDAIRE
•
frigidaire.com
CANADA
•
5855 Terry Fox Way
•
Mississauga, ON L5V 3E4
•
1-800-265-8352
•
frigidaire.ca
FGTC2349K 06/09
© 2009 Electrolux Home Products, Inc.
Printed in the U.S.A.
Note:
Optional Collar Kit available to complete
“built-in look” for Panel Kit-Ready Refrigerator.
For specifications, refer to Collar Kit (CK23CDS)
Installation Specifications page on web.
