SENSOR COOKING
Sensor cooking has an electronic controlled sensor that
detects the vapor (moisture and humidity) emitted from the
food as it heats. The sensor adjusts the cooking times and
power level for various foods and quantities automatically.
Using Sensor Settings:
1. After oven is plugged in, wait 2 minutes before using
Sensor Settings.
2. Be sure the exterior of the cooking container and the
interior of the oven are dry. Wipe off any moisture with
a dry cloth or paper towel.
should be cooked following the guidelines in any micro-
wave cookbook.
appear in the display. Do not open the oven door or press
the
STOP clear
pad during this part of the cycle. The
measurement of vapor will be interrupted. If this occurs,
an error message will appear. To continue cooking, press
the
STOP clear
pad and cook manually.
When the sensor detects the vapor emitted from the
food, remainder of cooking time will appear. Door may
be opened when remaining cooking time appears in the
display. At this time, you may stir or season food, as
desired.
, the oven will turn off, and the correct time
of day will be displayed. If the sensor does not detect
vapor properly when cooking other foods,
ERROR
will
be displayed, and the oven will turn off.
time is needed, continue to cook manually.
Covering Foods:
Some foods cook better when covered. Use the cover
recommended in the food charts.
1. Casserole lid.
2. Plastic wrap: Use plastic wrap recommended for microwave
cooking. Cover dish loosely; allow approximately
1
/
2
inch
to remain uncovered to allow steam to escape. Plastic
wrap should not touch food.
3. Wax paper: Cover dish completely; fold excess wrap
under dish to secure. If dish is wider than paper, overlap
two pieces at least one inch to cover.
Be careful when removing any covering to allow steam to
escape away from you.
Sensor Cook
) under the SENSOR COOK .
You can cook many foods by pressing the
sensor cook
pad
and the food number. You don’t need to calculate cooking
time or power level.
• Suppose you want to cook Frozen Entrees.
Step
Press
1. Press the
sensor cook
pad, number 1 for
Frozen Entrees.
sensor
cook
1
2. At end, follow the directions in the display.
3. Press the
START
enter +30 sec
pad.
START
enter
+30 sec
NOTES for SENSOR COOKING
food condition (e.g. initial temperature, shape,
quality). Check food for temperature after cooking. If
additional time is needed, continue to cook manually.
foods, manipulation message or remaining cooking
time will be displayed.
cooking progress frequently so that there is no
chance of overcooking food.
SENSOR COOKING applies to the following selections: Sensor
, Sensor Reheat.
ice
1
4
NOTES for SENSOR COOKING
Menu label
6. Check food for temperature after cooking. If additional
4. During the first part of SENSOR COOKING, food name will
3. More or less food than the quantity listed in the chart
5. If the sensor does not detect vapor properly when
cooking rice
There are 4 foods (Frozen Entrees, Frozen Pizza, Ground
Meat and R
It is not necessary to enter amount.
Cook, Snack Menu, Vegetables, Potato
sensor cook
1
2
3
4
Frozen Pizza
Ground Meat
Rice
1
2
3
Pasta
Soup
Dinner Plate
1
2
3
4
5
6
Frozen MW Pizza
Hot Dogs
Frozen Kids Meals
Meal in a cup
Soup
Beverage
sensor reheat
snacks mm
Frozen Entrees
1. The fi nal cooking result will vary according to the
2. When sensor detects the vapor emitted from the
3. Stay near the oven while it’s in use and check
4.
