background image

5

Before you begin, thoroughly familiarize yourself with the control panel and remote 
as shown below and all its functions, then follow the symbol for the functions you 
desire. The unit can be controlled by the touch pad alone or with the remote.

ELECTRONIC CONTROL

Air Conditioner Features

2009 Electrolux Home Products, Inc.

All rights reserved.

Operating Instructions

NOTE

The following instructions represent the Touch Pad, the same instructions can be used for the Remote Control.

TO TURN UNIT ON:

YOU WILL SEE:

PRESS ON/OFF BUTTON

DO THIS:

Air Conditioner Features & Operating Instructions

ADJUSTS

TEMPERATURE

OR TIME

 DISPLAYS 

 TEMPERATURE/TIME

SETS FAN 

SPEED

SETS MODE

TURNS UNIT

ON OR OFF

ACTIVATES 

TIMER

CHECK FILTER

RESET BUTTON

SLEEP MODE

REMOTE TEMP

SENSING INDICATOR

(some models)

CLEAN AIR 

FEATURE

(some models)

STANDARD REMOTE

w/DISPLAY &

REMOTE SENSING

BUTTON

FOR HEAT MODELS

Battery Size: AAA
Warning: 

Do not mix old and new batteries. Do not mix 

alkaline, standard (carbon-zinc), or rechargeable (nickel-
cadmium) batteries.

Note: The unit will run in energy saver(econ) mode when 
used for the first time. In this mode, the fan will continue to 
run for 1 minute after the compressor shuts off. The fan then 
cycles on for 20 seconds at 10 minute intervals until the room 
temperature is above the set temperature, at which time the 
compressor turns back on.

Содержание FFRE1533Q1














Отзывы: