10
DOOR REMOVAL/REVERSAL
(UNITS WITH TEMPERATURE CONTROL INSIDE)
12. Using a Phillips™ screwdriver, re-
move the screw from the door stop
(see Figure 5A).
13. Using a flat head screwdriver, gently
pry the door stop off the bottom
hinge pin (see Figure 5B).
14. Using a ratchet with a 12 mm socket,
remove the bottom hinge pin (see
Figure 5C).
15. Reinstall the hinge pin into the outer
hole and tighten with a ratchet and a
12 mm socket (see Figure 6A).
16. Flip door stop over 180° (see Figure 6B)
and reinstall onto the opposite hinge
over the hinge pin (see Figure 6C).
17. Secure the door stop with a screw
(see Figure 6D).
18. Reinstall the hinge cover by gently
bending the cover tabs outward,
while sliding the cover over the
hinge until it clicks into place (see
Figure 7).
Door
Stop
Door
Stop
Screw
Bottom
Hinge
Pin
Figure 5
A
B
C
Figure 6
A
B
C
D
Figure 7
