background image

ELECTRONIC OVEN CONTROL

5

DELAYED START:

To Set the Oven for a Delayed Starting Time and an Automatic Turn-Off

To set the controls for this type of operation, follow steps 1-6 above and then steps 7-8 below:

7. Push the 

STOP TIME pad. 

The words "OVEN", "STOP" and "TIME" will flash. The display will show

the calculated stop time based on current time of day and cook time. A number indicating which oven
is being programmed will also flash (1- upper oven, 2- lower oven).

8. Push the 

UP

 

(   )

 or

 DOWN 

(   )

 ARROW pad

 until the time that you want cooking to be completed

appears in the display.

Example:

 If at 10 o'clock you set the oven for 350°F/177°C temperature and 2 hours and 30 minutes

cooking time, the calculated stop time would be "12:30". If you want the stop time to be 1 o'clock,
push 

STOP TIME pad

 and the 

UP 

(   )

 ARROW pad

 until "1:00" appears in the display. Three seconds

after this setting, the display will return to the current time of day.

The oven will calculate back from the stop time by 2 hours and 30 minutes to start the oven at 10:30.
Until the time of day reaches 10:30, the word "DELAY" will show in the display. At the end of the
delayed period, the word "DELAY" will go off and the oven will begin to heat. The word "PRE" will
not appear in the display. As the oven heats, the display will show a rise in increments of 5°F/2.5°C until
the programmed temperature is reached.

At the end of the programmed cook time, the oven will turn off automatically and beep 3 times.

To recall time function programmed

, push the appropriate time pad.

To cancel timed function only

, hold the 

BAKE TIME pad

 for 3 seconds. This cancels only the cook

time and stop time, not the programmed bake mode.

NOTE:

 Clock controlled baking can be used with both ovens simultaneously. However, cook time and

stop time will be the same for both ovens. One oven may also be used for regular baking or convection
baking/roasting while the other oven is in the clock controlled mode.

NOTE: 

If one oven is set for clock controlled baking, the other oven cannot be set for self-cleaning.

Note: 

If more than 10 seconds

elapse between pushing a pad and
pushing the 

UP

 

(   )

 or 

DOWN 

(   )

ARROW pad

, the oven is not set

and the display window will show
the previous display.

Note: 

Baking can be stopped at any

time by pushing the 

CANCEL pad

.

Note: 

Clock controlled cooking is

not recommended for baking items
that require a preheated oven. For
these items, preheat the oven and
then set the timed cooking function.
Food continues to cook if left in the
oven. For best results, remove the
food as soon as beeps signal the
end of the cooking time.

 Use caution when using the automatic timer. Use the automatic timer to cook cured or frozen meats and most fruits and

vegetables. Foods that can easily spoil, such as milk, eggs, fish, meat or poultry should be chilled in the refrigerator first.  Even when chilled,
they should not stand in the oven for more than 2 hours before cooking begins, and should be removed promptly when cooking is
completed.

Содержание FEB798WCCH









Отзывы: