9
Child Lock Controls
To prevent children from accidentally changing
the dishwasher cycle or starting the dishwasher,
lock the dishwasher controls by touching the
NO HEAT DRY pad for 3 seconds. The
CONTROLS light will come on and no new
selections can be made until the lock is
released. To unlock the controls, touch the NO
HEAT DRY pad for 3 seconds until the light
goes out.
Status Window
The Status window indicates the following
activity:
1H-9H . Number of delay start hours.
The last hour will count
down in minutes.
CL Close dishwasher door. The
status indicator lights will
also flash to indicate current
cycle status.
HO .. Indicates a water heat delay.
MINUTES ... Number of minutes left in
cycle (1-99). If cycle is longer
than 99 minutes, a small light
will appear to the left of the
first 9 and remain on until
time counts below 99.
PF Appears in window when
dishwasher is first installed,
or when power has been
interrupted. HI-TEMP WASH
and NO HEAT DRY indicator
lights will also flash. To clear,
touch START/CANCEL pad.
Operating Instructions
(continued)
Preparing and Loading
Dishes
Dish Preparation
Scrape away large pieces of food, bones, pits,
toothpicks, etc. The continuous filtered wash
system will remove remaining food particles.
Burned-on foods should be loosened before
loading. Empty liquids from glasses and cups.
Foods such as mustard, mayonnaise, vinegar,
lemon juice and tomato based products may
cause discoloration of stainless steel and
plastics if allowed to sit for a long period of
time. Unless the dishwasher is to be operated
at once, it is best to rinse off these food soils.
Load racks so that large items do not
prevent the detergent dispenser from
opening.
Check manufacturers recommendations
before washing items in question.
If the dishwasher drains into a food
disposer,
be sure disposer is completely
empty before starting dishwasher.
