4
Your dishwasher cleans by spraying a mixture of hot water and detergent through the spray arms against soiled surfaces. Next,
the dishwasher fills with water covering the filter area. Water is then pumped through the filter and spray arms. Soil particles go
down the drain as the water is pumped out and replaced with clean water. The number of water fills will vary with the cycle being
used.
Dishwasher Features
Very Important Information—Read
Before Operating Your
Dishwasher!
Normal Operating Sounds
This dishwasher does not sound like most
dishwashers—IT'S QUIETER.
Your Precision Direct Wash System® dishwasher uses
energy efficient motors for the wash and drain portions of
the cycle you select. Each cycle has a series of water fills
and drains for washing and rinsing dishes. As each cycle
begins, you may–or may not–hear the drain motor.
The next sound you will hear is the splashing water as it
enters the tub. Then the lower arm rotates and circulates
water. This is followed by a pause and a slightly different
sound as the upper arms spray water. If you listen
closely, you will hear the change in sound as the wash
action switches from one arm to the other.
PLEASE BE ADVISED: If you compare this dishwasher
to previous models, you may be surprised at what you
DON'T hear!
Heating Element
Glass Trap
Self-Cleaning
Filter
Rinse Aid
Dispenser
Tub Gasket
Middle Spray Arm
Lower Spray Arm
Detergent Dispenser
Vent
Top Rack
Serial Label
(located on right
side of tub)
Bottom Rack
Silverware
Basket
Cup Shelves
Overfill Protector
Appearance may vary from your model.
Nozzle
Getting Started
1. Load dishwasher
2. Add detergent
3. Add rinse aid, if needed
4. Close door to latch.
5. Select desired CYCLE
6. Select desired OPTIONS. The indicator light
above the pad will glow when selected.
7. Run hot water faucet nearest dishwasher until
water is hot. Turn water off.
8. To start, press START/CANCEL pad.
(on some
models)