9
TIMER
While the unit is on, press this button to enable the auto-shutoff feature. Keep
pressing the button to cycle through the timer options, 1, 2, 4 or 8 hours. Once
the selected time has completed, the unit will shut off.
EVAPORATIVE COOLING
While the unit is on, press this button to enable evaporative cooling.
Please
note that in order for evaporative cooling to work, the water tank must be
filled in between the min and max fill lines. Remove the tank from the back of
the unit and replace it once the water has been filled.
Pressing this button will
turn on the water pump, which will run water through the cooling pad on the
back of the unit, cooling the air coming into the unit, and thus cooling the air
coming out of the front of the unit.
To make the air even colder, drop the included ice packs into the water tank.
Do not break open or modify ice packs in any way.
The water pump will automatically shut off after 10 hours of operation.
To disable the evaporative cooling feature (and return to fan-only mode), just
press the evaporative cooling button again.
MODE
While the unit is on, it will be in normal mode by default. Press this button
again to switch to nature mode, a second time to switch to sleep mode, and a
third time to switch back to normal mode. In normal mode, the fan operates at
a fixed speed set by the user with the fan speed button (see below).
Nature mode:
The unit operates normally, except fan speed automatically
cycles between the three settings; low, medium and high. This mode is meant
to replicate a shifting natural breeze.
