21
Suggestions for convect broil
1. Be sure to carefully follow all the recommended
broil pan and insert instructions and the directions
for placing the oven racks as provided in the “Broil”
section in this Use & Care Guide.
2. Since
convect broil
cooks food faster, reduce the
cook time by 25% from the recommended cook
time of your recipe (check the food at this time).
If necessary, increase cook time until the desired
doneness is obtained.
3.
Close the oven door
when using convect broil.
Convect broil
(some models)
Use the convect broil feature to cook thicker cuts of
meats that require direct exposure to radiant heat and the
convection fan for optimum browning results.
1. Press
convect
key 3 times.
3 times
2. Press
start
(See Fig. 1).
To set convect broil with a default oven set
temperature of 550°F:
Step Press
Setting convect convert
The convect convert feature allows you to convert any
baking recipe using the convect (convection) feature. The
control uses the normal recipe settings and adjusts to a
lower temperature for convect baking.
Convect convert may only be used with the convect bake
feature.
To set convect using default oven set temperature
of 350°F and adding the convect convert:
Step Press
1. Press
convect.
2. Press
convect convert.
Some models are not equipped with the
convect broil
feature. When using the convect key to toggle between
the convect features models without the convect broil
feature will only show the convect bake and convect
roast option settings in the display.
NOTE
NOTE
NOTES
When convect convert is used with a cook time or a
delay start setting, the convect convert feature will
display a “
CF
” for
check food
when the bake time
is 75% complete (See Fig. 2). At this time the oven
control will sound 1 long beep at regular intervals until
the set cook time has finished.
The convect fan will begin rotating
once convect
bake or convect roast has been activated.
When using convect convert cook time reductions may
vary depending on the oven set temperature.
The minimum amount of cook time allowed using the
convect convert feature with a
bake time
or a
delay
time bake
setting is 20 minutes.
Layer cakes will have better results using the normal
bake
feature.
Fig. 1
Fig. 2
SETTING OVEN CONTROLS
The convect fan will begin rotating
once convect
broil (some models) has been activated.
To stop convect broil at anytime press
cancel
.
To stop convect convert at anytime press
cancel
.
Содержание CGEF3039RF
Страница 35: ...35 NOTES ...