4
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT INSTRUCTIONS FOR UNPACKING
AND INSTALLATION
IMPORTANT - Read and follow the below instructions
and precautions for unpacking, installing, and
servicing your appliance:
Remove all tape and packaging before using the appli-
ance. Destroy the carton and plastic bags after
unpacking the appliance. Never allow children to play
with packaging material. Do not remove the wiring
label and other literature attached to the appliance. Do
not remove model/serial number plate.
Cold temperatures can damage the electronic control.
When using this appliance for the first time, or when
the appliance has not been used for an extended
period of time, be sure the appliance has been in
temperatures above 32ºF (0ºC) for at least 3 hours
before turning on the power to the appliance.
Never modify or alter the construction of the appliance
by removing the leveling legs, panels, wire covers,
anti-tip brackets/screws, or any other part of the appli-
ance.
Be sure to have an appropriate foam-type fire extin-
guisher available, visible, and easily accessible
located near the appliance.
GROUNDING INSTRUCTIONS
Proper Installation—Be sure your appliance is
properly installed and grounded by a qualified techni-
cian. In the United States, install in accordance with
the National Fuel Gas Code ANSI Z223.1/NPFA No.
54, latest edition and National Electrical Code NFPA
No. 70 latest edition, and local electrical code require-
ments. In Canada, install in accordance with CAN/
CGA B149.1 and CAN/CGA B149.2 and CSA
Standard C22.1, Canadian Electrical code, Part 1-
latest editions and local electrical code requirements.
Install only per installation instructions provided in the
literature package for this appliance.
For personal safety, this appliance must be properly
grounded. For maximum safety, the power cord must
be securely connected to an electrical outlet or
junction box that is the correct voltage, is correctly
polarized and properly grounded, and protected by a
circuit breaker in accordance with local codes.
It is the personal responsibility of the consumer to
have the appropriate outlet or junction box with the
correct, properly grounded wall receptacle installed by
a qualified electrician. It is the responsibility and obli-
gation of the consumer to contact a qualified installer
to assure that the electrical installation is adequate
and is in conformance with all local codes and ordi-
nances.
This appliance is equipped with a 4-prong grounding
plug for your protection against shock hazard and
should be plugged directly into a properly grounded
receptacle. Do not cut or remove the grounding prong
from this plug.
For personal safety, the appliance must be properly
grounded. For maximum safety, the power cord must
be plugged into an electrical outlet that is correctly
polarized and properly grounded.
Avoid fire hazard or electrical shock. Failure to
follow this warning may cause serious injury, fire, or
death.
Avoid fire hazard or electrical shock. Do not use an
adapter plug, use an extension cord, or remove
grounding prong from the power cord. Failure to
follow this warning may cause serious injury, fire, or
death.
WARNING
WARNING
Figure 1:
Grounding plug and receptacle
240V grounded
wall receptacle
Power supply
cord with 4-prong
grounding plug
