ALLFRZKIT Installation Instructions
Please read these instructions thoroughly before beginning to install the trim kit.
Tool List: Have these on-hand before starting installation.
Phillips Screwdriver
Tape (duct or masking)
Shims - Wooden or Plastic
Carpenter’s Level
Tape Measure (min. 7’ length)
Drill & 1/8” bit
Safety Glasses
Before you begin:
•
Be careful when unpacking components. Do not use sharp objects when removing packaging material.
This may scratch the surface of trim components.
•
Make sure that your rough opening is 33" wide by 75" tall (from top of flooring) by at least 25-1/4" deep
from the cabinet’s front face.
Outside dimensions of the installed kit are 34-1/8" wide by 75-1/4" high.
•
Make sure there is a large, clear area of floor (approx. 7’ by 7’) to assemble the trim kit. Place a drop
cloth over the floor to prevent scratching of the trim kit and/or floor.
•
Use extreme care when handling the metal trim pieces. Corners are very sharp and easily damaged if
dropped.
Always wear Safety Glasses when working with power tools and sharp objects.
You should have received the following items with your collar kit option:
Item
Part
#
Qnty
A
Top Trim
297032601
1
B
Left Hand Side Trim
297032701
1
C
Right Hand Side Trim
297032700
1
D
Small Grille
297032902
1
E
Large Grille
297032801
1
F
Toe Grille
297034502
1
Plastic bag contains the following:
H
Corner Brackets “L” shaped
297034600
2
I
Set Screws (for corner brackets)
297034700
4
J
Hinge Cover (silver plated)
216809002
1
K
Phillips Head Screws - #8 x ¾”
050149
6
L
Allen Head Wrench
1006
1
PN: 297058200
