background image

3

IMPORTANT SAFETY INSTRUCTIONS

Avoid fi re hazard or electrical shock. Do not use an adaptor plug or extension cord or remove grounding 

prong from electrical power cord. Failure to follow this warning can cause serious injury, fi re or death.

Grounding type

Grounding type

10-30R

10-30R

3-wire

3-wire

240 v Electric Dryer

240 v Electric Dryer

120 v Gas Dryer

120 v Gas Dryer

14-30R

14-30R

4-wire

4-wire

(fused 30 amp)

(fused 30 amp)

(fused 30 amp)

(fused 30 amp)

wa

wall receptacl

ll receptacle

Po

Power cord with

wer cord with

3-prong 

3-prong  gr

grounded plug

ounded plug

Do not,

Do not, under

under

an

any cir

y circumstances,

cumstances,

cut,

cut, remo

remove

ve,

or b

or bypass th

ypass th

UL-approved service

UL-approved service
cord must be installed

cord must be installed
on electric dryers (not

on electric dryers (not
provided with unit

provided with unit
except those

except those
manufactured for sale

manufactured for sale
in Canada).

in Canada).

e

gr

grounding pr

ounding prong.

ong.

PREVENT FIRE
•  Do not dry items that have been previously cleaned in, 

soaked in, or spotted with gasoline, cleaning solvents, 

kerosene, waxes, etc. Do not store these items on or 

near the dryer. These substances give off vapors that 

could ignite or explode.

•  Do not place items exposed to cooking oils in your dryer. 

Items contaminated with cooking oils may contribute to 

a chemical reaction that could cause a load to catch fi re.

•  Do not dry articles containing rubber, plastic or similar ma-

terials such as bras, galoshes, bath mats, rugs, bibs, baby 

pants, plastic bags and pillows that may melt or burn. 

Some rubber materials, when heated, can under certain 

circumstances produce fi re by spontaneous combustion.

•  Clean the lint screen before or after each load. The in-

terior of the dryer, lint screen housing and exhaust duct 

should be cleaned approximately every 18 months by 

qualifi ed service personnel. An excessive amount of lint 

build-up in these areas could result in ineffi cient drying 

and possible fi re. See Care and Cleaning.

•  Do not operate the dryer if the lint screen is blocked, 

damaged or missing. Fire hazard, overheating and 

damage to fabrics can occur.

•  Do not obstruct the fl ow of ventilating air. Do not stack 

or place laundry or throw rugs against the front or back 

of the dryer.

•  Do not spray any type of aerosol into, on or near dryer 

at any time.

•  Do not use fabric softeners or products to eliminate 

static unless recommended by the manufacturer of the 

fabric softener or product.

•  Do not continue to use the dryer if you hear squeaking, 

grinding, rubbing or other unusual noises. This could 

be a sign of mechanical breakdown and lead to fi re or 

serious injury. Contact a qualifi ed technician immedi-

ately.

•  Failure to comply with these warnings could result in 

fi re, explosion, serious bodily injury and/or damage to 

the rubber or plastic parts of the dryer.

WARNING

FIRE HAZARD

A clothes dryer produces combustible lint. The dryer 

must be connected to an outdoors exhaust. Regularly 

inspect the outdoor exhaust opening and remove any 

accumulation of lint around the opening and in the 

surrounding area.

 WARNING - RISK OF FIRE

To reduce the risk of fi re, electrical shock, or injury to persons when using this dryer, comply with the basic warnings 

listed below. Failure to comply with these warnings could result in serious personal injuries.

You can be killed or seriously injured if you don’t follow these Important Safety Instructions:

Содержание Affinity FAHE4044M W?




















Отзывы: