8
Operating Instructions
Getting Started
1. Load Dishwasher (See Preparing
and Loading Dishes).
2. Add detergent (See Dishwasher
Dispenser & Detergents).
3. Add Rinse Aid, if needed (See Rinse
Aid).
4. Run hot water faucet nearest
dishwasher until water is hot. Turn
water off.
5. Select desired
Cycle
(See Cycle
Chart).
6. Select desired
Option
(See Option
Selections).
7. To start, press
START/Cancel
pad
and close door immediately.
To Start a Cycle
When cycle and options are selected,
LEDs of selected cycle and options
are illuminated, and the LED above the
START/Cancel
button illuminates.
To start the cycle, press
START/Cancel
button and immediately close the
dishwasher door.
Opening the door during cycle
If you open the door while a cycle is
running or delay is counting down, the
dishwasher will stop running.
The LEDs of selected cycle and options are
illuminated. The LED above
START/Cancel
button will blink to press start.
To resume, press
START/Cancel
button and close the dishwasher door
immediately.
The
START/Cancel
LED illuminates solid
after the
START/Cancel
button is pressed.
If the dishwasher door is kept open for
too long, or the door is closed without
pressing
START/Cancel
button, the
running cycle or delay countdown will be
canceled.
6
Delay Time
The
Delay Time
option allows you
to automatically delay starting your
dishwasher 2, 4, or 6 hours.
To start the
Delay Time
option,
press
Delay Time
until the desired
delay time LED illuminates. A
light will come on indicating the
delay has been set and will remain
on until cycle starts. Press the
START/Cancel
button to start the
delay option. If the delay option
is interrupted, the
START/Cancel
button will have to be pressed again
to return to delay option.
To cancel the
Delay Time
option
and
to begin the selected cycle
before the delay period is over,
press and hold
START/Cancel
button for 3 seconds.
7
Control Lock
Lock the dishwasher controls by
pressing and holding the
Control
Lock
button until the lock LED
comes on to prevent children
from starting the dishwasher or
accidentally changing the wash
cycle. To unlock the controls, press
the
Control Lock
button until the
lock LED goes off.
OPERATING INSTRUCTIONS
If it is desired to have the console lights
remain off while running, perform the
following operation: Prior to starting
a cycle, press and hold
Heavy Wash
and
Rinse Only
simultaneously for
approximately 8 seconds until the
corresponding lights flash. This will
turn the console lights off during cycle
operation. Simply repeat this operation
to revert back to the previous setting.
Console Lights
To Cancel a Cycle and Delay
Cycle
Both a running cycle and a delay cycle can
be canceled at any time.
Open the dishwasher door and press the
START/Cancel
button until the cycle and
option LEDs turn off. The running cycle or
delay countdown is canceled.
Press the
START/Cancel
button and close
the door immediately to drain. After a 90
second drain you may be able to select a
new cycle after canceling a previous wash
cycle.
