background image

To prevent injury to the user or other people and property damage, the 
following instructions must be followed.

Incorrect operation due to ignoring of instructions may cause harm or 
damage. The seriousness is classified by the following indications.

Safety precautions

1.  Connect with the power properly. 

Otherwise, it may cause electric 
shock or fire due to excess heat 
generation.

shock.

sounds, smell, or smoke comes 
from it. It may cause fire and 
electric shock.

switching on or off the power. It 
may cause electric shock or fire due 
to heat generation.

damp environment. It may cause 
electric shock.

electric parts. It may cause failure of 

04

Safety precautions

3.  Disconnect the power if strange 

machine, electric shock or fire.

2.  Always ensure effective grounding. 

No grounding may cause electric 

4.  Do not operate or stop the unit by 

5.  Do not operate with wet hands or in 

6.  Do not allow water to run into 

heating appliances. It may cause 
fire and electric shock.

unspecified power cord. It may 
cause electric shock or fire.

  9.Do not damage or use an 

8.  Do not use the power cord close to 

flammable gas or combustibles, 
such as gasoline, benzene, thinner, 
etc. It may cause an explosion or

 fire.

7.  Do not use the power cord near 

power cord and ensure that the 

21.Do not place heavy object on the 

is danger of fire or electric shock.

cord will not be compressed. There 

Содержание 66129904886




























Отзывы: