Frigidaire 316000642, Руководство пользователя

Страница: 5 / 20

5
Control Pad Functions
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For
satisfactory use of your oven, become familiar with the various functions of the
oven as described below.
BROIL PAD —
Used to select
the variable
broil function.
UP and DOWN ARROW PADS — Used along with the
function pads to select oven temperature, cooking
time, stop time (when programming an automatic
stop time), time of day, clean time and minute timer.
BAKE PAD —Used to
enter the normal
baking mode
temperature.
STOP TIME PAD —
Used to set the
desired stop time
for baking. Can be
used with BAKE
TIME to program a
delayed bake cycle.
BAKE TIME PAD —
Used to enter the
length of the
baking time.
CLEAN PAD —
Used to select the
self-cleaning
cycle.
OVEN, PREHEAT & LOCK LIGHTS — The "OVEN"
light will glow each time the oven unit turns on to
maintain the set oven temperature. The "PREHEAT"
light will glow when the oven is first set to operate,
or if the desired temperature is reset higher than
the actual oven temperature. The "LOCK" light will
flash until the door locks when the self-clean cycle
is in use. It glows constantly after the door locks.
TIMER PAD —
Used to set or
cancel the minute
timer. The minute
timer does not
start or stop
cooking.
FEATURE
INDICATOR
LIGHTS — These
light to show which
feature is in use.
CLOCK PAD — Used
to set the time of
day.
The oven can be programmed to:
• Bake normally
• Time bake
• Broil
• Self-clean
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed
for silent operation. Push and hold . After 7 seconds, the control will beep once. This will block the controls from
sounding when a pad is pushed. To return the sound, push and hold again for 7 seconds until 1 beep is heard.
Note: The control will return to the audible mode after a power outage.
Temperature conversion:
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (65°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Push . "— — —" appears in the display.
2. Push and hold the until "HI" appears in the display.
3. Push and hold until °F or °C appears in the display.
4. Push the or to change °F to °C or °C to °F.
5. Push any function pad to return to normal operating mode.
CLEAR PAD — Used to
clear any function
previously entered
except the time of day
and minute timer. Push
CLEAR to stop cooking.