10
Pizza Shelf
(some upright models)
Here is the place to store up to four extra-large
boxes of frozen pizza without ever having to
dig them out from beneath a pile of other
stored goods. To change the location of the
pizza shelf: support the bottom center of the
shelf with one hand and use your other hand
to gently ease each support tab outward until
they have all dropped between the edge of the
shelf and the liner wall. It may help to slide the
supporting shelf slightly to the side opposite
that in which you are removing the tabs in
order to get a larger gap between the edge of
the supporting shelf and the liner wall.
Next, locate the pizza shelf beneath the shelf
nearest your desired location and snap each
tab upwards between the wire or glass shelf
and liner until the tab has snapped into place
and is resting on top of the supporting shelf.
Repeat for each tab until all four are firmly in
place and then load with desired items.
OPTIONAL FREEZER FEATURES
Chest Divider
(some chest models)
Use these clever dividers to custom-arrange
a variety of different sized storage bins in the
bottom of your chest freezer. Use the peel-n-
stick labels found in your literature packet to
help remind you which items are stored where.
If you have an item that isn’t already covered
by one of the pre-printed labels then use one
of the blank labels and a permanent marking
pen to make your own custom label. Labels
can be peeled off when no longer needed and
replaced by new and different ones.
Examples of Chest Divider Configurations:
Compressor Mounted Drain Pan
(most upright frost-free models)
Most upright frost free freezers are equipped
with a compressor mounted drain pan that
collects condensate during each defrost cycle.
This compressor mounted drain pan takes
advantage of the heat generated by the
compressor to evaporate condensate water so
there is no need to empty the pan during each
defrost cycle.
Drain Pan
Compressor
Содержание 2970792
Страница 1: ......
