8
TIMER: DELAY STOP / START
FEATURE
Air Conditioner Features
(continued)
Note: In this “MODE” the selected temperature will increase by
2 degrees F 30 minutes after the mode is selected. The
temperature will then increase by another 2 degrees F after an
additional 30 minutes. This new temperature will be maintained
for 7 hours before it returns to the originally selected
temperature. This ends the “Sleep” MODE and the unit will
continue to operate as originally programmed. The “Sleep”
MODE program can be cancelled at any time during operation
by again pressing the “Sleep” button.
DO THIS:
PRESS
TIMER BUTTON
YOU WILL SEE: TIMER SETTING
LIGHT On
Note: For Delay Stop, the unit must be in the On position.
Note: For Delay Start, the unit must be in the Off position.
To adjust timer setting, tap or hold the UP arrow(^) or the DOWN
arrow(V) to change delay timer at .5 hour increments, up to 10
hours, then at 1 hour increments up to 24 hours. The control
will count down the time remaining until start (8, 7.5, 7, etc.).
The Delay Start mode automatically selects cooling with
maximum Fan Speed. The temperature maintained will be the
same as previously set. To change the set temperature, press
“COOL” then Up or Down arrows until the desired temperature
is indicated on the display. After 5 seconds, the control will
automatically change the display back to the hours remaining
until the unit will start/stop. Turning the unit “ON” or “OFF” at
any time will cancel the Delay Start/Stop function.
DO THIS:
PRESS SLEEP
BUTTON
YOU WILL SEE:
SLEEP FEATURE:
LIGHT On
SZ000400(En)-Yaokong
12/10/2004, 5:36 PM
8
