Frigidaire 154768601, Инструкция по использованию и уходу

Страница: 7 / 20

7
Options Selections
Hi-Temp Wash
When HI-TEMP WASH option is selected, the dishwasher
heats water in the main wash to approximately 140°F
(60°C).
This increase in water temperature helps
dishwasher detergent remove food grease and soil from
dishes more effectively and aids in drying. HI-TEMP
WASH option can be used with all cycles except RINSE
ONLY. HI-TEMP WASH is automatically provided when
HEAVY WASH cycle is selected.
When HI-TEMP WASH option is selected, the light above
the pad will come on and remain on until end of cycle. To
turn off the HI-TEMP WASH option, press the pad a
second time. The light above the pad will turn off.
Sanitize Option
To sanitize your dishes and glassware, select the
SANITIZE option. When selected, the light above the pad
will come on and remain on until end of cycle. The water
temperature in the final rinse will be raised to 155°F
(68°C) and will maintain that temperature for 9 minutes.
This option is available in Heavy and Normal Wash
cycles. Only these sanitization cycles have been designed
to meet NSF requirements.
The cycle time will be extended until the proper water
temperature is reached. Washing action will continue
during the water heating delay. For best results, the
incoming water temperature should be at least 120°F
(49°C).
The sanitize criteria may not be satisfied if there is an
interruption of the cycle, power failure or if the incoming
water temperature is below 120°F (49°C).
To turn off the SANITIZE option, press the pad a second
time. The light above the pad will turn off.
Delay Start
The DELAY START option allows you to automatically
delay starting your dishwasher from 1-10, 1-24 or 2-4-6
hours depending on your model.
On models with 1-10 or 1-24 hour delay, press the
DELAY START pad until the desired delay time shows in
the STATUS window. A light will come on indicating the
delay start hours and will remain on until cycle starts.
On models with 2-4-6 hour delay, press the pad once for
a 2 hour delay, twice for 4 hours and three times for 6
hours. A light will come on indicating the delay start
hours and will remain on until cycle starts.
To cancel the DELAY START option and begin the cycle
before the delay period is over, press the START/CANCEL
pad.
To Cancel a Cycle
You can cancel a cycle anytime during the cycle. Press
START/CANCEL pad and the dishwasher will start a 90
second drain. At the end of the drain, select the desired
cycle.
Heat Dry
The HEAT DRY option in combination with rinse aid will
enhance drying performance. The energy required to use
the HEAT DRY option costs pennies per cycle. You may
choose not to select the HEAT DRY option; however you will
have items in your dish load that will not be completely dry
at the end of the cycle.
Opening the door longer than one minute during the dry
cycle cancels the selected dry program.
OPERATING INSTRUCTIONS