Address: Room 1705,Block A1, Longyuan Plaza, Longkouxi Road, Guangzhou, China, 510640 Website:
http://www.arm9.net
Sales: +86-20-85201025 Tech Support: +86-13719442657 Fax: +86-20-85261505
Email for Business and Cooperation:
Email for Tech Support: [email protected]
第
- 41 -
页
1.7.13 CMOS Camera
The TinySDK/ADK 1312B and Smart210 SDK 1305 have a CMOS camera interface
which is a 2.0mm spacing 20 pin header. Users can use our CAM130 cameras by
connecting it to this header. Actually the CAM130 doesn’t have any circuits and it is a
conversion board which applies the ZT130G2 module.
Note: the CAMER interface is a multiplexed port which can be used as a GPIO by
setting corresponding registers. The table below shows its GPIO pins. In addition the
CMOS Camera interface is also connected to a TVP5150 chip. Users can select either
CCD or CMOS by jumping J3 to different positions.
CAMERA
CAMERA
Pin Spec
CAMERA
Pin Spec
1
I2CSDA0
2
I2CSCL0
3
XciFIELD
4
CAM_A_RESET/GPJ3_1
5
CAM_A_CLK
6
CAM_A_HREF
7
CAM_A_VSYNC
8
CAM_A_PCLK
9
CAM_A_DATA7
10
CAM_A_DATA6
11
CAM_A_DATA5
12
CAM_A_DATA4
13
CAM_A_DATA3
14
CAM_A_DATA2
15
CAM_A_DATA1
16
CAM_A_DATA0
17
VDD_3.3V
18
VDD_2.45-2.8V
19
VDD_1.8V
20
GND
Please refer to the schematics in the shipped CD for the exact connection details between each pin and CPU. The
information provided here is for reference
