21
Troubleshooting
The MILKchiller™ II is
plugged in, however, the
display is blank.
Make sure the cord is securely plugged into the power
supply and the Power Switch is in the ON position.
If display remains blank, call the
MILKchiller™ II HOTLINE for service.
If the MILKchiller™ II
is turned off, will I lose
my settings?
No, the MILKchiller™ II will have the same settings
at the next start-up.
The display continues to
flash “COOLING”
two
hours after powering ON
the MILKchiller™ II.
Remove and discard the contents of the
MILKchiller™ II.
Turn the MILKchiller™ II OFF, wait 3 seconds,
then turn ON.
Use a new container of dairy product that has been
refrigerated at the proper temperature.
If problem persists, call the MILKchiller™ II
HOTLINE
There was a power
failure for 2 or more
hours, is the milk safe?
It is recommended not to serve dairy products that
have not been cooled for over 2 hours.
If there is a power failure during business hours,
remove the container from the chilling chamber and
place in refrigerator. Turn the MILKchiller™ II to
OFF for the duration of the power failure.
Power ON the MILKchiller™ II after the power
has been restored.
When loading a ½ gallon
carton, liquid escapes
from the Disposable
Straw.
Some ½ gallon containers are filled to the top, causing
milk to escape.
Pour out 2 oz. of liquid prior to inserting the
Disposable Straw.
The milk turned to ice.
Call the MILKchiller™ II HOTLINE for service.
When the push button is
pressed, the LOW
indicator flashes, even
with a full carton of dairy
product installed.
This is normal, the force of pressing the push button
triggers the LOW indicator. It will disappear when
the push button is released, unless the liquid level is
actually LOW.
