Friedrich Twintemp EM18, Инструкция по установке и эксплуатации

Страница: 15 / 46

5
External Control Status
The
$MAR T
icon illuminates to indicate that the system is being controlled
remotely.
SET PO I N T
F
A UT O F AN
79
FRR125
$MAR T
The icon illuminates to indicate that the system is receiving a Wi-Fi
connection.
SET PO I N T
F
A UT O F AN
79
FRR126
1. Timer (factory default)
the start, stop and day window can be found latter in this manual.
2. Residential Schedule - When selected the unit follows a pre-
programmed set of operational parameters that covers 7 days of
the week with 4 time windows during each day. Each time window
!" #
$
1
S CH E D ULE
FRR137
To change the * <>?#@J?VXZ?
button for 3 sec.
If the Schedule function is available, the system displays the icon +
SCHEDULE
icon. The display indicates the schedule function that is active.
To change to an alternate schedule (2 or 3), press the or button.
If the Schedule function is not available, the Timer icon shows without
the
SCHEDULE
icon.
[\* <>?#?]^ $_`
If there is no button activity for 15 seconds, the function will time out and
[ [ *
display reverts to the normal display.
2
S CH E D ULE
FRR138
or button, within 15 second of pressing the
] {*
|[\* <>?#?]^ $_`
SET PO I N T
F
A UT O F AN
79
FRR136
The display reverts to the normal display.
ADVANCED FUNCTIONS
Z ![^ *
Schedule, Error Mode, Test Mode, and Maintenance Menu). The functions
mentioned in the following section may or may not be available depending
on the air conditioner model.
Timer/Schedule Select
SET PO I N T
F
A UT O F AN
79
FRR136
3. Commercial Schedule - When selected the unit follows a pre-
programmed set of operational parameters that covers 7 days of
the week with 2 time windows during each day. Each time window
!" #
$