Friedrich DVKA, Руководство по установке

Страница: 10 / 14

10
6. Front Panel Installation
6-2. Attach the front panel to the assembly(
¿
+
ƒ
+
≈
+ indoor unit) and use bolt(
¡
) to fix both the
front panel and the assembly to the indoor unit.
When attaching, get the bracket of the front panel to the hanger of the ventilation kit(
¿
).[Fig.2]
Be sure to assemble the bolts tightly, so that they are tightened to the upper part of the indoor
unit. [Fig.3]
Firstly, insert 1/3 of bolt (
¬
) into 2 diagonal
places. After checking the position with the
ceiling, insert them into all of 4 places.
Through the edge hole, adjust the ceiling fixing
bolts to fit the ceiling and the front panel.
During above 6-2, the bolts(
¬
) are
only used for PTVK use the bolts in
the front panel package box. For
details, see the section of the front
panel in the air conditioner installation
manual. When the m
ventilation kit + front panel are not
closely assembled, cold air may leak
and cooling/heating gets weak and
water drops may fall. [Fig. 4]
Fig. 2 Fig. 3
INDOOR ONIT BRACKET
KIT BRACKET
FRONT PANEL
VENTILATION HOOK
INDOOR
FRONT PANEL
VENTILATION KIT
FRONT PANEL BRACKET
※
Front panel installation
Caution
Be sure to completely mount the fixing hanger on the ventilation kit hanger,
so that the front panel doesn’t fall.
If this isn’t assembled completely, fall, injury and accident may occur.
Warning
Fig.4