2
Libra+ Push
Thank you for choosing this Friedland product. Please use the following instructions to
ensure correct installation and use. Keep these notes in a safe place for future reference
.
Unpack your push and identify the following parts:
●
Bell push
●
CR2032 battery for bell push
●
2 x fixing screws for push
●
Adhesive pad
You will need:
●
A 4mm cross-head screwdriver
●
A small flat bladed screwdriver
Checking pack contents
Before proceeding with the installation,
please note the following safety warnings:
¬
●
Always follow the manufacturer’s advice
when using power tools and wear suitable
protective equipment (e.g. safety goggles)
when drilling holes etc.
¬
●
Before drilling holes in walls, check for
hidden electricity cables and water pipes,
the use of a cable/pipe locater maybe
advisable if in doubt.
Safety
You need to do the following to get started:
●
Open the bell push
●
Fit the push battery
Follow the programming procedure for your
Libra+ chime.
Quick start
