FRIEDHELM LOH Rittal 1194.42 Series, Руководство по сборке и эксплуатации

Страница: 9 / 28

8 Handling instructions
Page 9 of 28 Rittal cooling unit assembly and operating instructions
8 Handling instructions
8.1 Fitting the cooling unit
The enclosure cooling unit may optionally be exter-
nally mounted on the enclosure (1) or partially inter-
nally mounted (2).
Figure 7: Installation method
To this end, cut the side panel or door of the enclo-
sure, as per the Manu included with the supply, and
drill the relevant holes.
Notice!
For mounting the units SK 3370724 in
the TS side panel or rear panel, we rec-
ommend the use of enclosure panel
fasteners TS 8800.071 (see RITTAL
Catalogue).
8.1.1 External mounting of the cooling
unit
 Cut the supplied sealing tape to the correct
length and stick it carefully along the back of the
unit so that no gaps are left at the joints.
Figure 8: Applying the self-adhesive tape
 Screw the supplied grub screws into the blind nuts
on the rear of the unit.

Secure the unit using the supplied washers and
nuts.
Figure 9: Securing the unit (all compact units except 3370220)
8.1.2 Partial internal mounting of the
cooling unit (accessories not in-
cluded)
 Fix the 4 mounting bars on the air conditioner by
using screws.
Figure 10: Fixing mounting bars
 Cut the supplied sealing tape to the correct length
and stick it carefully along the inside of the rear
enclosure half so that no gaps are left at the con-
nection points.
Figure 11: Sticking sealing tape
 Mount the front enclosure tray using the washers
and nuts.