7 Troubleshooting
22
We reserve the right to make technical modifications.
Rittal Crimping machine L8
EN
6.6
When required
Compressed-air maintenance unit
◼
Drain the condensate water. To do this, press the drain plug upwards.
If the container is soiled, it can be cleaned with water.
◼
To do this, close the compressed-air feed and unscrew the container.
Attention!
Property damage!
Clean the container only with water.
For cleaning, the filter element can be screwed off.
◼
Place the filter in a solvent (e.g. benzine or petroleum), flush well and allow to
dry.
Fig. 19:
Compressed-air maintenance unit
Key
1
Filter
2
Container
3
Drain plug
7
Troubleshooting
7.1
Machine does not start
The power supply is interrupted.
◼
Check the mains cable and the fuses.
7.2
No start for inserted wire
Start sensor (S1) is blocked with stripped insulation scrap.
◼
Remove the stripped insulation scrap.
Wire inserted incorrectly.
◼
Insert the wire as described in section 4.4 "Conductor insertion / conductor cut-
ting".
1
2
3
