Rittal Liquid Cooling Package
5
1 Notes on documentation
1
1
Notes on documentation
1.1
CE labelling
Rittal GmbH & Co. KG hereby confirms that the cooling
units in the LCP DX series are compliant with the EMC
Directive 2014/30/EC as well as with the Machinery Di-
rective 2006/42/EC. A corresponding declaration of
conformity has been issued and enclosed with the doc-
umentation package supplied with the unit.
The cooling unit bears the following mark.
1.2
Information on electromagnetic
compatibility
The LCP DX is a class A device as defined by EN 55022.
Under certain circumstances, the device may cause ra-
dio interference in domestic environments. In such cas-
es, the operator may be asked to implement appropriate
measures.
1.3
Storing the documents
The assembly and operating instructions as well as all
applicable documents are integral components of the
product. They must be handed to those persons who
are engaged with the unit and must always be available
and on hand for operating and maintenance personnel.
1.4
Symbols in these operating instructions
The following symbols are found in this documentation:
This symbol indicates an "Action Point" and shows
that you should carry out an operation/procedure.
1.5
Other applicable documents
The general plant documentation for the room where the
equipment is situated (construction specifications for the
ventilation system) also applies in conjunction with these
assembly and operating instructions.
1.6
Normative instructions
1.6.1
Legal information concerning the operating
instructions
We reserve the right to make changes in content. Rittal
GmbH & Co. KG is not responsible for any damage
which may result from failure to comply with these as-
sembly and operating instructions. The same applies to
failure to comply with the valid documentation for acces-
sories used.
1.6.2
Copyright
The distribution and duplication of this document and
the disclosure and use of its contents are prohibited un-
less expressly authorised.
Offenders will be liable for damages. All rights created by
a patent grant or registration of a utility model or design
are reserved.
Danger!
Hazardous situation which may lead to
death or serious injury if the instructions
are not followed.
Warning!
Hazardous situation which may lead to
death or serious injury if the instructions
are not followed.
Caution!
Hazardous situation which may lead to
(minor) injuries if the instructions are not
followed.
Note:
Information concerning individual proce-
dures, explanations, or tips for simplified ap-
proaches. Also indicates situations which
may result in material damage.
