SWX H
12
GB
Assembly and operating instructions
General Instructions
Read these instructions carefully before
installation and use. Keep this manual for
future reference.
The product may only be used as set out in
the assembly and operating instructions. The
guarantee is only valid if the product is used
in the manner intended and in accordance
with the instructions.
Application
SWX is a range of fan heaters suitable
for environments with strict demands on
materials and safety. Models are available for
use in rooms with high temperatures. Fan
heater SWX has a robust design, adapted to
the requirements of harsh environments.
Supplied with air director with individually
adjustable louvres that direct the air flow on
one plane.
SWX H has an inspection hatch with quick
release.
Protection class: IP65.
SWX H
The fan heater is available in two sizes,
SWXH13 and SWXH23. They have
been especially developed to heat the
air in environments with high ambient
temperatures such as in the drying and curing
industry as well for decontamination.
• Uses hot water as the energy medium.
• The casing, air directors and brackets are
made of stainless steel, EN 1.4016.
• Water coil with copper pipes and louvres
with hydrophilic coating for easier cleaning
and better durability, among other things.
• Protection class IP65 – protected against
dust and water jets.
• Inspection hatch with quick release.
• Supplied without any automation and a
single fan speed.
• Wall bracket supplied for mounting of the
fan heater on the wall for a horizontal air
stream.