Frico Climobile, Оригинальное руководство пользователя

Страница: 8 / 14

1
2
3
Climobile
8
EN
1 Retaining screw
2 Wedging block
3 Wedging block
Cleaning
Switch off the unit and remove the plug from
the socket before cleaning.
1. Clean the surface of AC with a wet soft
cloth. Don't use chemicals, such as benzene,
alcohol, gasoline, etc.; otherwise, the surface
will be damaged or even the whole AC will be
damaged.
2. If the filter screen is clogged with dust, and
the effectiveness of the AC is reduced, be sure
to clean the filter screen once every two weeks.
2.1 Clean the upper filter screen frame
• Clasp the wedging block of the EVA filter
screen frame with hands. Force down from
the outside to remove the EVA filter screen
frame. Unscrew four screws fixing the
EVA filter screen and the rear housing to
remove the EVA filter screen (as shown in
the below figure).
• Put the EVA filter screen into warm water
with neutral detergent (about 40 °C /104 °F)
and dry it in the shade after rinsing clean.
2.2 Clean the lower filter screen frame
• Hold the handle of the CON filter screen
frame, and pull it outward gently to remove
it.
• Put the CON filter screen into
warm water with neutral detergent
(about 40 °C /104 °F) and dry it in the
shade after rinsing clean.
Storage
• Unscrew the drainage cover, unplug the
water plug, and discharge the water in the
water pan into other water containers or
directly tilt the unit to discharge the water
into other containers.
• Tum on the AC, adjust it to low-fan
ventilation mode, and maintain this state
until the drainage pipe becomes dry, so as
to keep the inside of the unit in a dry state
and prevent it from mildewing.
• Tum off the AC, unplug the power plug, and
wrap the power cord around the wrapping
hooks; install the water plug and the
drainage cover.
• Remove the vent hose and keep it properly.
• Cover the AC with a plastic bag. Store in
a dry place, keep it out of the reach of
children, and take dust control measures.
• Remove batteries of the remote control and
keep them properly.
Note: ensure that the unit is placed in a dry
place and keep all AC components properly.