Service & maintenance
1.0 Installation
1.1 Product description
Frico’s heating panels Aquaztrip can be mounted recessed in a false ceiling, with
suspended mouting or on a wall and primarily provide heating by radiation. Radiant
heating can also be used with high ceiling heights since the radiant heating, despite
the high placement, heats the underlying surfaces directly without any losses to the
air.
1.2 Handling
The panel must be handled with care, ensuring that the panel does not sustain dents,
scratches or bends during installation.
Always seek to lift the panel at multiple points.
–
Do not lift in pipes
–
Do not lift in edges
–
Each panel is equipped with protective film to avoid any damage during transport
and handling at building site. The film needs to be removed before commissioning
the products.
1.3 Mounting instruction
–
Please visit www.frico.net
1.4 Connection description water
Flow indication arrows are shown on the inlet and return pipes in order to assist the
installer. If the panel has been ordered with integrated valves, a special direction of
the flow must be upheld to ensure correct flow through the thermostatic valve. If the
panel has been delivered without integrated valves, the flow can be reversed, depend-
ing on the location of the retrofitted valve. Please note the flow direction indicator on
the valve to insure correct installation in relation to the desired flow.
2
Aquaztrip H, L, P
