28
Stand/Update: 01.2019
1. Press the (ID DATA) function key .
2. Use the direction keys to select “GPS 1–3”.
3. Press the (Input/Emergency Input) function key.
4. Enter each of the numbers from the fi rst to the last using the direction keys
on the virtual keypad. When fi nished, press OK.
5. Press the (Confi rm) function key to save the entered numbers, the (Cancel)
function key to abort the input, or the (Backspace) function key to delete
preceding numbers.
6. Previously assigned GPS coordinates can be edited on the virtual keypad.
7. Press the (OK) function key or the STOP key to close the menu.
5.4.2
Traceability Barcodes / Pipe Number / Pipe Length
Traceability Barcodes is activated when the fusion barcode on the fusion fi tting
is read in.
The main window prompts you to enter the traceability barcode on
the fi tting.
When this is being read in, you are prompted to enter the traceability
barcode on Component 1. When Pipe Number and/or Pipe Length
has been activated, these are also shown and can be entered
accordingly.
Now you are prompted to enter the traceability barcode on
Component 2. The pipe number and/or pipe length is entered
analogously to the above.
Press the (confi rmation) function key to acknowledge the prompt
“Pipe
Processed?”
when the fusion pipe has been processed properly. Press the
START key to initiate fusion.
INFORMATION
The traceability data are input in turn, i.e. the display presents the entered
data in succession until fusion can be started. You can use the (back/next)
function key to switch at any time between the separate prompts “Fitting” /
“Component 1” / “Component 2” / “Pipe Processed” / “Start”.
Use the direction keys to navigate inside the separate prompts.
