Fri-Jado TDW 5, Руководство пользователя

Страница: 21 / 24

TDW
EN /
21-24
9123875
/
1205
6.4. Replacing a lamp
WARNING
Remove the power plug from the wall socket.
WARNING
Do not touch the lamps with bare hands.
Use a clean cloth or paper tissues
when replacing the lamp
Remove any moisture with alcohol or methyl spirits after the lamp has cooled
down
➊ ➋
3. Remove the broken lamp by moving it in the length-direction of the lamp.
4. Install the new lamp (230 V – 200 W). First press one side of the lamp into the lamp
holder (A). Press lamp in its correct position (B) and use its spring pressure to make
contact with the other terminal (see Figure 9).
5. Make sure the lamp is correctly clamped between the two terminals (C). If this is not
the case, the lamp can move freely along its length-direction, until it is fixed into its
terminals.
Figure 9
0