Fri-Jado MD 60 Hot, Руководство по обслуживанию

Страница: 13 / 26

Removal and replacement of parts
Page 13
Service Manual Multi Deck 60/ UK form 913765 rev.12/2008
2
Putting the new glass in place

Attach all nuts B by hand.

Hold nut B in position using a spanner.

Tighten nut A firmly using a spanner.

Put the insulation plates in the top !

Apply the top plate.

Thoroughly clean the side and remove any
traces of fat.


Glue a piece of foam of 1/8". (X) on the top
side.

Apply silicone paste following the pattern as
shown in above picture.

Position the notches which are glued to the
glass in the holes.

Put the brackets on the threaded studs.

Put the screws in the top plate

Put the bottom plate in the unit.

Position the honey comb profile with the
retainer in the opening.

Place the product stopper in the channel in
the bottom plate.
X