Page 14
Installation Manual Multi Deck 60/100/120 / Classic Deck form 9123789 rev. 07/2015
UNPACKING
The picture above shows the unit after re-
moval of the crate.
Remove the screws from the board on
the right hand side of the pallet as shown
above.
1. Carefully tilt the unit slightly.
2. Remove the beam assembly.
3. Carefully lower the unit until it rests on
the floor.
1. Remove the screws from the board on
the left hand side of the pallet.
2. Carefully tilt the unit slightly.
3. Remove the beam assembly.
4. Carefully lower the unit until it rests on
the floor.
5. Remove the remaining boards.
WARNING! Prevent the unit from
rolling away on the casters.
